Inconel Spiral Wound Gasket

This Inconel Spiral Wound Gasket can be made according to different locking force requirements, and the inner and outer steel rings are used to control its maximum compression degree.

Product Details

Product Feature

This Inconel Spiral Wound Gasket is particularly suitable for occasions with uneven load, easy to loose the joint force, which has longer service life for use and there is no special need of maintaining. And it can be statically sealed originals intended for flange connection processing of valves, pumps, heat exchangers, towers, manholes, and hand holes.


Product Description

This Inconel Spiral Wound Gasket can be made according to different locking force requirements, and the inner and outer steel rings are used to control its maximum compression degree. After the outer diameter is pushed to the bolt, the middle sealing portion can be centered, so that a good sealing effect can be achieved. It is used to seal flange connections of pipelines, valves, pressure vessels, condensers, heat exchangers, towers, manholes, and hand holes in the petroleum, chemical, metallurgy, power, shipbuilding, and machinery industries.


C

Mn

P

S

Si

Cr

Ni

Mo

Columbium +Ca

Ti

Al

Fe

0.05

0.03

0.01

0.003

0.25

22.0

Balance

9.0

3.5

0.3

0.3

4.0

 

 


Yield Strength (0.2% offset)

Ultimate  Tensile Strength

Elongation (%)

430    MPa

940    MPa

51.5



 


Hot Tags: Inconel Spiral Wound Gasket suppliers China, manufacturers, factory, wholesale, made in China
Inquiry

You Might Also Like