Seal ring generally fall into the exhaust pipe interface pad, muffler, the exhaust pipe winding pads, etc., according to the different models and models the exhaust pipe gaskets in a variety of forms, commonly used interface pad graphite with high temperature resistant material or mica...
Seal ring generally fall into the exhaust pipe interface pad, muffler, the exhaust pipe winding pads, etc., according to the different models and models the exhaust pipe gaskets in a variety of forms, commonly used interface pad graphite with high temperature resistant material or mica compounded and sprint sheet stainless steel clad plate cutting, products with super compression resilience and resistance to high temperature sealing performance. Muffler sealing ring is mainly composed of wire mesh and high-temperature graphite by special processing ceramic powder compressed into spherical shape, make it have better lubrication and sealing performance, is the preferred seal products in a car or motorcycle exhaust system. The automobile muffler seal ring developed by our company has been widely used and has developed many different models. Exhaust pipe winding pads, commonly used in automobile or motorcycle use circular outlet seal, general use stainless steel material and graphite or asbestos, non-asbestos, form of V and W type two kinds, the exhaust pipe winding gasket produced by our company has a strong advantage has now export to Taiwan, South Korea, Europe and the United States and other countries and regions.
TECHO is one of the leading manufacturers and suppliers of various sealing products in China. We have skillful and experienced workers in our factory. Now take action to wholesale quality spiral wound gasket of car made in China with us.
Performance characteristics of exhaust pipe pad:
1. Good compression and resilience.
2. Good sealing effect can be achieved at high temperature.
3. Different structures and forms can be adopted according to different requirements. Guarantee the best sealing effect under different working conditions, and meet the sealing needs of exhaust pipe system of various automobile motorcycles.
Application range: automobile, motorcycle, ship exhaust system interface seal pad, muffler seal ring, etc.
Installation precautions for exhaust pipe gaskets:
1. Improper installation. After the inlet pipe of the muffler is inserted into the round cushion of the exhaust pipe, it is inserted into the inner end of the exhaust pipe interface and then pressed with the flange and fixed with two bolts. Due to the gap between the two, if the pressure is not tight or the bolt is loose, the high temperature and high pressure exhaust gas will flow down the gap, directly to the round pad, resulting in the heat distortion of the exhaust flange. It is easy to be ablated and damaged by this high temperature and high pressure exhaust gas.
2. Loose connection bolts. Car when driving, bumps and vibration causes muffler clamp in horse hanger bolt, nut and other connection is loose and fall off, causing the exhaust outlet of two fixed bolt is loose. In this case, due to the pressure of the exhaust pipe flange is not tight, the seal is not strict, and the impact of the exhaust flow is increased, which is easy to make the round cushion ablation.
3. The plane of the exhaust pipe is uneven. If the lining of the exhaust pipe is not smooth, and there are a lot of impurities, it is easy to cause the bolt to be fastened. At this point, the end face of the interface has a trace air gap, the seal is not strict, under the impact of the exhaust flow to make the round pad burn.
When installing a new piece, first remove the impurities in the lining of the exhaust pipe, and add a new pad (that is, a new one and an old one) on the original round mat. After driving about 200km, tighten the bolts to avoid loosening, and check the fastening nuts of the muffler in each connection position. Otherwise, will cause the interface round cushion bolt to loosen, make round gasket seal failure again leak gas.